SME(에스엠이)/30/12,SME V-12 GOLD TONEARM
업체 거래간 개인 정보 유출에 주의하시고 본문의 연락처보단 상단의 업체 연락처로 연락하시기 바랍니다.
가급적 업체 주소지로 방문해서 직거래하여 안전한 거래되시기 바랍니다.하이파이클럽 직거래장터에 등록된 판매, 구매, 교환 물품은 개인 또는 업체가 등록한 것으로 하이파이클럽은 등록을 위한 시스템만 제공하고 내용이나 당사자간 거래에 대해 일체의 책임을 지지 않습니다.
Arm
9, 10 and 12 inch arms, but designed to compliment our very own Series V-12 tonearm.
Suspension
No sonic footprint, the sub-chassis is hung on one hundred and twenty strands of rubber in the form of sixty purpose moulded ‘O’ rings. An ingenious method of anchorage allows them to be removed or replaced instantly.
Damping
Sub-chassis motion is disciplined by four fluid dampers, one in each of the supporting columns. These eliminate overshoot and give almost zero Q recovery. The isolation needed to prevent acoustic feedback is bridged by the resistive coupling of the damping fluid through which unwanted reacted energy is conducted away to ‘ground’. This function is adjustable through trimmers which can be used in conjunction with a gauge to give recommended settings or varied to suit individual conditions.
Platter
330 mm (13”) diameter weighing 7.5 kg (17 lbs). The face is machined with a fine scroll found to interface better than a plain surface. A substantial reflex clamp ensures maximum contact with the platter even when severe record warp is present. The sub-chassis/arm mounting board interface is extensionally damped and the mounting board is reversible to allow mounting of nine inch pick-up arms when necessary.
Motor
The turntable is driven by a 3 phase, brushless outrunner motor with 8-pole Neodymium magnets and 3 integrated Hall effect sensors and virtually vibrationless by reason of its 2.5 kg (5.5 lbs) weight as well as being isolated on urethane mounts that are adjustable for accurate belt positioning.
Speed Control
The electronic controller uses a high performance microprocessor, optimised for motor control. Closed loop speed control is implemented using a proportional plus integral (PI) algorithm. Fine pitch speed adjustment allows increments/decrements of +/-0.01% of selected speed. Speed ranges: 33.3, 45 & 78 rpm.
Power
Mains voltages available are 90-110V, 105-125V and 220-240V 50/60 Hz. Please specify when ordering.
Dimensions & Weight
- Dimensions: 530 x 400 x 232 mm
- Net weight: 53.5 kg (118 lbs)
- Shipping weight: 79.5 kg (175 lbs)
- Shipping weight approximately: 79.5kg (175lb)
