±èÆíÀÇ ÇÁ¸®ºä
T+A Ç÷¡±×½Ê ÀÎƼ¾ÚÇÁ PA 3100 HV
Specifications | |
---|---|
Pre-amplifier stage | |
Frequency response + 0 / – 3 dB | 0,5 Hz –300 kHz |
Signal / noise ratio | 105 / 110 dB |
Total harmonic distortion | < 0,001% |
Intermodulation | < 0,001 % |
Channel separation | > 90 dB |
Nominal input sensitivity High level (RCA) | 7 x 250 mVeff ... 6 Veff / 20 kOhms |
Nominal input sensitivity Balanced (XLR) | 4 x 500 mVeff ... 12 Veff / 5 kOhms |
Outputs | |
Headphones | 50 Ohms |
1 x Recorder | 250 mVeff / 100 Ohms |
PRE out RCA | nom 1 Veff, max 9,5 Veff / 50 Ohms |
PRE out XLR | nom 1,45 Veff, max 19,6 Veff / 50 Ohms |
Output stage | |
RMS output per channel into 8 Ohms | 300 Watts |
RMS output per channel into 4 Ohms | 500 Watts |
Peak output into 8 Ohms | 380 Watts |
Peak output into 4 Ohms | 700 Watts |
Power bandwith | 1 Hz – 150 kHz |
Frequency response + 0 / – 3 dB | 0,5 Hz – 180 kHz |
Slew rate | 60 V/µs |
Damping factor | > 65 |
Signal / noise ratio | > 115 dB |
Total harmonic distortion | < 0,03 % |
Reservoir capacity | 120000 µF |
Mains / Accessories / Dimensions | |
Mains | 110 V/60 Hz or 220/240 V/50 Hz |
Standby | < 0,5 W |
Remote control | F 3001 |
Features | Trigger input +5 ... 20V for external switching-on Input 4 can be configured in surround mode (Surround pass-through) connectivity for additional PS 3000 HV LAN connector for home-automation systems |
Optional Accessories | PS 3000 HV Power Supply | PH HV MM oder MC phono module | APM signal processor module | Power Three HD (Carbon) | Power Bar | Audio Quad (Carbon) | Speaker Hex (Carbon) HV-Individual finish (Individual colours on request)| IP control |
Dimensions (H x W x D) | 17 x 46 x 46 cm |
Weight | 38 kg |
Finishes | Case: silver laquer 47 or titanium laquer 64 Heat sink: black 42 |
| Technical modifications reserved |
T+A PA 3100 HV | |
---|---|
¼öÀÔ»ç | ¼Ò¸®¼¥ |
¼öÀÔ»ç ȨÆäÀÌÁö | |
±¸¸Å¹®ÀÇ | 02-582-9847 |